Misalignment Switches

Conveyors may run out of line, causing major damage. For this reason, misalignment switches are provided to register belt misalignment and to switch off the belt if necessary.

Kiepe Misalignment Switches are enabled by approaching and swinging out of the roller lever when a switching angle is reached. When the belt runs correctly once more, the misalignment switch will reset automatically.

Depending on the type of switch, two switching points can be provided for warning (pre-alarm) and switch-off; furthermore, latching of the roller lever after enabling is possible.

Your Kontakt

Birgit Sacha Teamleader /Productmanager Industry

Kiepe-Platz 1
40599 Düsseldorf
Deutschland - Germany

Phone: +49 (0) 211 74 97-0
info@kiepe-elektrik.com

Overview Misalignment Switches

Misalignment Switch MAS

enclosure: PA66-Plastic - material of roller: PA switching points: 10° and 25° contact configuration: 2 changeover contacts

Misalignment Switch VG

enclosure: Aluminum - material of roller: PA - with / without latching - with/without pre-alarm - switching points: 12°

Misalignment Switch MRS

enclosure: PBT-Plastic - material of roller: stainless steel - switching points: 10° and 25° Contact configuration: 2 changeover contacts

Misalignment Switch HES

enclosure: Aluminum - material of roller: stainless steel - switching points: 5°..15° and 15°..35° (adjustable) Contact configuration: up to 4 changeover contacts (positive making)

Misalignment Switch SL

enclosure: BMC - material of roller: stainless steel - switching points: 5°..15° and 15°..35° (adjustable) contact configuration: up to 4 changeover contacts

Misalignment Switch SEL

enclosure: cast iron - material of roller: stainless steel - switching points: 5°..15° and 15°..35° (adjustable) contact configuration: up to 4 changeover contacts

Overview EX Misalignment Switches

Misalignment Switch HES EX

Zone 21 and/or 22: combustible, conductive dust - enclosure: Aluminum - material of roller: stainless steel - switching points: 5°..15° and 15°..35° (adjustable) HES EX xxx 2D : Devices for Zone 21 and 22 (2D) HES EX xxx 3D : Devices for Zone 22 (3D)

Misalignment Switch SEL EX

Zone 21 and/or 22: combustible, conductive dust - enclosure: cast iron- material of roller: stainless steel - switching points: 5°..15° and 15°..35° (adjustable) SEL EX xxx 2D : Devices for Zone 21 and 22 (2D) SEL EX xxx 3D : Devices for Zone 22 (3D)

back to product overview